Printed Electronics
We combine the knowhow and the perspectives of chemistry, printing technology and electronics.
ELANTAS develops and manufactures functional pastes, such as silver or carbon inks, as well as insulators and printable dielectrics for screen printing. These can be solvent-based or UV-curable. We place great emphasis on maximum user friendliness, such as good runnability and simple handling. At the same time, we strive to optimize the cost-benefit ratio in the area of the raw materials used and the pigmentation of the ink systems.
Our portfolio includes conductive inks, insulating inks and functional screen-printing inks for applications such as membrane switches, touch surfaces, in-mold electronics, hybrid electronics, sensors, RFID antennas and electroluminescent lighting. Typical applications are in industrial and automotive.
Joining our strengths – ELANTAS Europe and Saralon
With the cooperation of Saralon and ELANTAS in 2023 we extended our product portfolio of functional inks by e.g. copper inks, stretchable inks, electroluminescent inks, conductive adhesive inks and many more.
Do you need further information about our printed electronic products?
Please get in touch with us. We are looking forward to your email to ADVANCEDPRINTING@ALTANA.COM
Conductive & non conductive Adhesives
Conductive Adhesives
| Product | Description | Curing | Benefit/ Typical properties | Technical information |
| Bectron? CG 5660 | Electronic conductive adhesive (ECA) | 45 min at 90°C or 10 min at 130°C | Single component, conductive, epoxide, adhesive for applications in electronics and printed electronics, connecting electronic components, screen printable, 0.400 O/sq/mil | PDF (EN) |
| Bectron? CG 5661 | Electronic conductive adhesive (ECA) | 45 min at 90°C or 10 min at 130°C | Single component, conductive, epoxide, adhesive for applications in electronics and printed electronics, connecting electronic components, dispensable by jetting, 0.400 O/sq/mil | |
| Saral SilverGlue Beta 700 | Silver conductive adhesive ink | 1 min - 3 min at 90°C - 120°C | Especially designed anisotropic silver-based glue to electrically interconnect two substrates, heat activated glue, suitable for paper/plastic. Screen printable; Solvent based; Thermally cured | |
| Saral SilverGlue Alpha 600 | Silver conductive adhesive ink | 5 min - 20 min at 100°C - 150°C | Silver based conducting glue for fixing SMD components or PCB on paper/plastic, Low temperature curing (110°C), two components ink, suitable for paper, plastic and glass. Screen printable; Solvent based; Thermally cured | |
| Saral SilverGlue Pressure 200 | Silver conductive adhesive ink | 1 min - 2 min at 90°C - 120°C | Especially designed anisotropic silver-based glue to electrically interconnect two substrates, pressure activated glue, suitable for paper/plastic. Screen printable; Solvent based; Thermally cured | |
| Saral SilverGlue UV 100 | UV Silver conductive adhesive ink | ~500 mJ/cm2 | Especially designed for fast curing of SMD components (with bottom contact pads only) on transparent plastic. UV curable silver based conductive adhesive. Cured glue is isotopically conductive. Screen printable; Solvent based; Thermally cured |
Non conductive adhesives
| Product | Description | Curing | Benefit/ Typical properties | Technical information |
| Elan-glue? AC 1611 | Insulating and transparent electronic adhesive | UV-cure only | Single component, acrylates, transparent, globe top in thick layer | PDF (EN) |
| Elan-glue? AC 1650 | Insulating and transparent electronic adhesive | UV-cure only | Single component, acrylates, transparent, globe top in thick layer | PDF (EN) |
| Elan-glue? EP 5350 | Insulating electronic adhesive | Thermal cure (90–130°C) | Single component, epoxide, fixing electronic components | PDF (EN) |
| Elan-glue? EP 5611 | Insulating electronic adhesive | UV + thermal cure | Single component, epoxide, globe top for electronic components | PDF (EN) |
| Elan-glue? EP 5620 | Insulating and transparent electronic adhesive | Thermal cure (80–90°C) | Single component, epoxide, transparent, globe top in thin layer | PDF (EN) |
| Saral HotMeltGlue 800 | Insulating and transparent electronic adhesive | 1 min - 2 min at 90°C - 110°C | An ink that works as a hot melt glue when heated above 100°C. After printing and drying, the printed sheets can be stacked on top of each other, as the glue is not active at room temperature. Screen printable; Solvent based; Thermally dried |
Dielectric & Insulating Inks
Thermoformable insulating Inks
| Product | Description | Curing | Benefit/ Typical properties | Technical information |
| Bectron? CP 6680 | Thermoformable conductive silver ink | 10 min at 120°C | Optimized for in-mold electronics, 0.025 ?/sq/mil | |
| Bectron? CP 6681 | Conductive silver ink | 10 min at 120°C | Optimized for PC films, 0.015 Ω/sq/mil | |
| Bectron? DP 8480 | Thermoformable insulating ink | 10 min at 120°C | Optimized for in-mold electronics, good adhesion to silver and PC films | |
| Bectron? GP 9580 | Thermoformable conductive carbon ink | 10 min at 120°C | Optimized for in-mold electronics, good adhesion to silver and PC films, 55 Ω/sq/mil | |
| Bectron? CT 6660 | Thinner | Thinner for Bectron? CP 6680, Bectron? CP 6681 | PDF (EN) | |
| Saral Copper 100B | Conductive copper ink | 5 min -10 min at 110°C | Low cost, air-curable copper particle based ink with a low sheet resistance (~10 mΩ /sq/25 μm). Suitable for paper and plastic substrates. Screen printable; Water-based; Thermally dried/cured | |
| Saral StretchSilver 800 | Conductive stretchable silver ink | 10 min at 120°C | Stretchable silver ink for stretchable electrical connections. Specially designed for bending applications such as TPU or bendable plastics with a good sheet resistance (30 mΩ/sq/25 μm). Screen printable; Solvent-based; Thermally dried/cured |
High temperature insulating Inks
| Product | Description | Curing | Benefit/ Typical properties | Technical information |
| Bectron? CP 6690 | High temperature conductive silver ink | 10 min at 160°C | Optimized for high temperature applications up to 200°C, good adhesion to ELAN-Film HT 180 and Kapton & glass, 0.015 Ω/sq/mil | |
| Bectron? DP 8491 | High temperature insulating ink | 10 min at 160°C | Optimized for high temperature applications up to 200°C, good adhesion to ELAN-Film HT 180 and Kapton | |
| Saral Copper 100B | Conductive copper ink | 5 min -10 min at 110°C | Low cost, air-curable copper particle based ink with a low sheet resistance (~10 mΩ /sq/25 μm). Suitable for paper and plastic substrates. Screen printable; Water-based; Thermally dried/cured |
Transparent insulating Inks
| Product | Description | Curing | Benefit/ Typical properties | Technical information |
| Bectron? DP 8481 | Insulating ink transparent | 5 m/min at >600 mJ/cm2 UVA | Good adhesion to silver, treated PET and PC films |
Translucent insulating Inks
| Product | Description | Curing | Benefit/ Typical properties | Technical information |
| Bectron? DP 8442 | Insulating ink green | 5 m/min at >600 mJ/cm2 UVA | Good adhesion to silver, untreated and treated PET films | |
| Bectron? DP 8443 | Insulating ink blue | 5 m/min at >600 mJ/cm2 UVA | Good adhesion to silver, untreated and treated PET films | |
| Bectron? DP 8444 | Insulating ink colorless | 5 m/min at >600 mJ/cm2 UVA | Good adhesion to silver, untreated and treated PET films | |
| Bectron? DP 8445 | Insulating ink colorless and flexible | 5 m/min at >600 mJ/cm2 UVA | Good adhesion to silver, untreated and treated PET films | |
| Bectron? DP 8446 | Insulating ink green and flexible | 5 m/min at >600 mJ/cm2 UVA | Good adhesion to silver, untreated and treated PET films | |
| Bectron? DP 8480 | Thermoformable insulating ink | 10 min at 120°C | Optimized for in-mold electronics, good adhesion to silver and PC films | |
| Bectron? DP 8491 | High temperature insulating ink | 10 min at 160°C | Optimized for high temperature applications up to 200°C, good adhesion to ELAN-Film HT 180 and Kapton |
Dielectric Inks
| Product | Description | Curing | Benefit/ Typical properties | Technical information |
| Bectron? EL 7030 D | Dielectric ink | 5 m/min at >600 mJ/cm2 UVA | PEDOT, paper and various films like PET or PC | |
| Saral Dielectric 600 | Dielectric ink | 1 min - 2 min at 90°C - 150°C | Barium Titanate based ink, suitable for paper and plastic substrates, does not dissolve easily by printing other solvent based inks on top of it. Suitable for electroluminescent displays. Screen printable; Solvent based; Thermally dried | |
| Saral UVDielectric 700 | UV dielectric ink | ~200 mJ/cm2 | Barium Titanate based UV curable ink, suitable for paper and plastic substrates, does not dissolve easily by printing other solvent based inks on top of it. Suitable for capacitors printing. Screen printable; UV curable; Good adhesion |
Electrical conductive Inks
Conductive Silver Inks
| Product | Description | Curing | Benefit/ Typical properties | Technical information |
| Bectron? CP 6662 | Conductive silver ink | 10 min at 120°C | Optimized for membrane switches, very flexible, long screen open time, good adhesion to untreated and treated PET films, 0.010 ?/sq/mil | PDF (EN) |
| Bectron? CP 6663 | Conductive silver ink | 10 min at 120°C | Optimized for membrane switches, 0.015 ?/sq/mil | PDF (EN) |
| Bectron? CP 6666 | Conductive silver ink | 10 min at 120°C | Good adhesion to glass, 0.025 ?/sq/mil | PDF (EN) |
| Bectron? CP 6667 | Conductive silver ink | 10 min at 120°C | Optimized for printing finer lines, very flexible, long screen open time, good adhesion to untreated and treated PET films, 0.015 Ω/sq/mil | PDF (EN) |
| Bectron? CP 6668 | Conductive silver ink | 3 min at 120°C | Very fast curing version, 0.010 ?/sq/mil | PDF (EN) |
| Bectron? CP 6669 | Conductive silver ink | 5 min at 120°C | Fast curing version optimized for a long screen open time, 0.010 ?/sq/mil | PDF (EN) |
| Bectron? CP 6671 | UV-curable conductive silver ink | 5 m/min at >700 mJ/cm2 UVA and 2 min at 100°C | UV-curable and ultra-low VOC, superior screen open time, 0.030 Ω/sq/mil | PDF (EN) |
| Bectron? CP 6680 | Thermoformable conductive silver ink | 10 min at 120°C | Optimized for in-mold electronics, 0.025 ?/sq/mil | PDF (EN) |
| Bectron? CP 6681 | Conductive silver ink | 10 min at 120°C | Optimized for PC films, 0.015 Ω/sq/mil | PDF (EN) |
| Bectron? CP 6690 | High temperature conductive silver ink | 10 min at 160°C | Optimized for high temperature applications up to 200°C, good adhesion to ELAN-Film HT 180 and Kapton & glass, 0.015 Ω/sq/mil | PDF (EN) |
| Bectron? CT 6660 | Thinner | Thinner for Bectron? CP 6662, Bectron? CP 6668, Bectron? CP 6669, Bectron? CP 6680, Bectron? CP 6681 | PDF (EN) | |
| Saral Silver 700 | Conductive silver ink | 10 min at 120°C | Multipurpose silver ink, with high electrical conductivity (7 mΩ/sq/25 μm), for low-cost applications. Suitable for paper and plastic substrates. Screen printable; Solvent based; Thermalyl dried/cured | |
| Saral HSCSilver 600 | Conductive silver ink | 10 min at 120°C | High conducting (8 mΩ/sq/25 μm) silver ink with a very high solid content (86%), specially designed for thick layer printing (e.g. antenna). Suitable for paper and plastic substrates. Screen printable; Solvent-based; Thermally dried | |
| Saral UVSilver 800 | UV-curable conductive silver ink | ~ 500 mJ/cm2 | UV curable silver ink, for fast curing processes. Suitable for paper and plastic substrates. A good sheet resistance (60 mΩ/sq/25 μm). Screen printable; UV curable; Good adhesion | |
| Saral StretchSilver 500 | Conductive stretchable silver ink | 10 min at 120°C | Stretchable silver ink for stretchable electrical connections, with a good sheet resistance (25 mΩ/sq/25 μm). Suitable for different stretchable substrates (e.g. textile) Screen printable; Solvent-based; Thermally dried | |
| Saral StretchSilverH2O 600 | Conductive stretchable silver ink | 2 min - 4 min at 120°C | Stretchable silver ink for stretchable electrical connections. Especially designed for bending applications (e.g. creasing) of paper. A good sheet resistance (20 mΩ/sq/25 μm). Screen printable; Water-based; Thermally dried | |
| Saral SilverH2O 600 | water-based conductive silver ink | 10 min at 120°C | Water based silver ink with moderate electrical conductivity (14 mΩ/sq/25 μm) and good surface wetting. Screen printable; Water-based; Thermally dried/cured | |
| Saral StretchSilver 800 | Conductive stretchable silver ink | 10 min at 120°C | Stretchable silver ink for stretchable electrical connections. Specially designed for bending applications such as TPU or bendable plastics with a good sheet resistance (30 mΩ/sq/25 μm). Screen printable; Solvent-based; Thermally dried/cured |
Conductive Carbon Inks
| Product | Description | Curing | Benefit/ Typical properties | Technical information |
| Bectron? GP 9552 | Conductive carbon ink | 10 min at 120°C | Silver top-coat with good adhesion to treated PET films, 40 ?/sq/mil | |
| Bectron? GP 9553 | Conductive carbon ink | 10 min at 120°C | Good adhesion to silver and untreated PET films, 40 ?/sq/mil | |
| Bectron? GP 9555 | Conductive carbon ink | 10 min at 120°C | Good adhesion to glass, resistance adjustable with Bectron AP 2555, 50 ?/sq/mil | |
| Bectron? AP 2555 | Modifier | 10 min at 120°C | Additive to rejust the resistivity of Bectron? GP 9555 | |
| Bectron? GP 9580 | Thermoformable conductive carbon ink | 10 min at 120°C | Optimized for in-mold electronics, good adhesion to silver and PC films, 55 Ω/sq/mil | |
| Saral Carbon 700A | Conductive Carbon ink | 10 min at 120°C | Solvent based carbon ink with very good adhesion on plastic and paper. A good sheet resistance (30 Ω/sq/25 μm). Screen printable; Solvent based; Thermally dried | |
| Saral CarbonH2O 400 | Conductive carbon ink | 10 min at 120°C | Water based carbon ink with good surface wetting. Especially designed for paper-based electronics. A good sheet resistance (40 Ω/sq/25 μm). Screen printable; Water based; Termally dried | |
| Saral ResistorKOhm 100 | Resistive ink | 15 sec - 5 min at 90°C - 120°C | Carbon based resistive ink to print resistors in kilo ohm range (1.8 kΩ/sq/6 μm). Very low influence of temperature and humidity in resistance. Screen printable; Solvent based; Thermally dried | |
| Saral ResistorMOhm 100 | Resistive ink | 15 sec - 5 min at 90°C - 120°C | Carbon based resistive ink to print resistors in mega ohm range (~2 MΩ/sq/6 μm). Very low influence of temperature and humidity in resistance. Screen printable; Solvent based; Thermally dried |
Other conductive Inks
| Product | Description | Curing | Benefit/ Typical properties | Technical information |
| Bectron? CP 6612 | Conductive silver/carbon ink | 10 min at 120°C | Long screen open time, 0.025 ?/sq/mil | |
| Bectron? CP 6618 | Conductive silver/carbon ink | 3 min at 120°C | Very fast curing version, 0.025 ?/sq/mil | |
| Bectron? CP 6619 | Conductive silver/carbon ink | 5 min at 120°C | Fast curing version optimized for a long screen open time, 0.025 ?/sq/mil | |
| Bectron? CT 6660 | Thinner | Thinner for Bectron? CP 6618, Bectron? CP 6619 | PDF (EN) | |
| Saral ConductingPolymer 700 | Conductive polymer ink Transparent conductive ink | 30 sec - 5 min at 90°C -120°C | Transparent and conducting polymeric ink, suitable for plastic and paper. High conductivity and a slow drying ink. Screen printable; Water based; Thermlly dried | |
| Saral Copper 100B | Conductive copper ink | 5 min -10 min at 110°C | Low cost, air-curable copper particle based ink with a low sheet resistance (~10 mΩ /sq/25 μm). Suitable for paper and plastic substrates. Screen printable; Water-based; Thermally dried/cured | |
| Saral ConductingPolymer 600 | Conductive polymer ink | 10 sec - 1 min at 70°C -120°C | Fast drying transparent and conducting polymeric ink, with a moderate electrical conductivity, suitable for paper. Screen printable; Water based; Thermlly dried |
Electroluminescent & Electrochromic Inks
Solvent based Inks
| Product | Description | Curing | Benefit/ Typical properties | Technical information |
| Bectron? CP 6662 | Conductive silver in | 10 min at 120°C | Optimized for membrane switches, very flexible, long screen open time, good adhesion to untreated and treated PET films, 0.010 ?/sq/mil | PDF (EN) |
| Bectron? CT 6660 | Thinner | Thinner for Bectron? CP 6662 | PDF (EN) | |
| Saral BluePhosphorL 800 | phosphor blue ink | 90°C / ~1 minute | Blue color light emitting ink, long working life of the display, suitable for paper, plastic and glass. Screen printable; Solvent based; Thermally dried | |
| Saral GreenPhosphorL 800 | phosphor green ink | 90°C / ~1 minute | Green color light emitting ink, long working life of the display, suitable for paper, plastic and glass. Screen printable; Solvent based; Thermally dried | |
| Saral OrangePhosphorL 800 | phosphor orange ink | 90°C / ~1 minute | Orange color light emitting ink, long working life of the display, suitable for paper, plastic and glass. Screen printable; Solvent based; Thermally dried | |
| Saral WhitePhosphorL 800 | phosphor white ink | 90°C / ~1 minute | White color light emitting ink, long working life of the display, suitable for paper, plastic and glass. Screen printable; Solvent based; Thermally dried | |
| Saral Silver 700 | Conductive silver ink | 90°C / ~1 minute | Multipurpose silver ink, with high electrical conductivity (7 mΩ/sq/25 μm), for low-cost applications. Suitable for paper and plastic substrates. Screen printable; Solvent based; Thermally dried/cured | |
| Saral ConductingPolymer 700 | Conductive polymer ink Transparent conductive ink | 90°C / ~1 minute | Transparent and conducting polymeric ink, suitable for plastic and paper. High conductivity and a slow drying ink. Screen printable; Water based; Thermally dried | |
| Saral ConductingPolymer 600 | Conductive polymer ink | 90°C / ~1 minute | Fast drying transparent and conducting polymeric ink, with a moderate electrical conductivity, suitable for paper. Screen printable; Water based; Thermally dried | |
| SaralEL Display ink set 1 | EL ink set (solvent based) | 90°C / ~1 minute | Saral Silver 700 | |
| SaralEL Display ink set 2 | EL ink set (solvent based) | 90°C / ~1 minute | Saral Silver 700 |
UV Inks
| Product | Description | Curing | Benefit/ Typical properties | Technical information |
| Bectron? EL 7001 AB | Active phosphor blue ink | 5 m/min at >600 mJ/cm2 UVA | PEDOT, paper and various films like PET or PC | |
| Bectron? EL 7002 AC | Active phosphor cyan ink | 5 m/min at >600 mJ/cm2 UVA | PEDOT, paper and various films like PET or PC | |
| Bectron? EL 7003 AG | Active phosphor green ink | 5 m/min at >600 mJ/cm2 UVA | PEDOT, paper and various films like PET or PC | |
| Bectron? EL 7030 D | Dielectric ink | 5 m/min at >600 mJ/cm2 UVA | PEDOT, paper and various films like PET or PC | |
| Bectron? EL 7080 TC | Transparent conductive ink | 5 min at 100°C | Paper and various films like PET or PC | |
| Bectron? EL 7090 E | Encapsulation ink | 5 m/min at >200 mJ/cm2 UVA | PEDOT, paper and various films like PET or PC; transparent insulation varnish | |
| Saral UVBluePhosphorL 800 | UV phosphor blue ink | ~200 mJ/cm2 | UV curable blue color light emitting ink, long working life of the display, suitable for paper, plastic and glass. Screen printable; UV curable; No dielectric layer needed | |
| Saral UVGreenPhosphorL 800 | UV phosphor green ink | ~200 mJ/cm2 | UV curable green color light emitting ink, long working life of the display, suitable for paper, plastic and glass. Screen printable; UV curable; No dielectric layer needed | |
| Saral UVOrangePhosphorL 800 | UV phosphor orange ink | ~200 mJ/cm2 | UV curable orange color light emitting ink, long working life of the display, suitable for paper, plastic and glass. Screen printable; UV curable; No dielectric layer needed | |
| Saral UVWhitePhosphorL 800 | UV phosphor white ink | ~200 mJ/cm2 | UV curable white color light emitting ink, long working life of the display, suitable for paper, plastic and glass. Screen printable; UV curable; No dielectric layer needed | |
| Saral UVSilver 800 | UV curable conductive silver ink | ~ 500 mJ/cm2 | UV curable silver ink, for fast curing processes. Suitable for paper and plastic substrates. A good sheet resistance (60 mΩ/sq/25 μm). Screen printable; UV curable; Good adhesion | |
| Saral ConductingPolymer 600 | Conductive polymer ink | room temperature | Fast drying transparent and conducting polymeric ink, with a moderate electrical conductivity, suitable for paper. Screen printable; Water based; Thermlly dried | |
| SaralEL Display ink set 3 | EL ink set (UV) | Saral UVSilver 800 Saral ConductingPolymer 600 Saral UVBluePhosphorL 800 |
Electrochromic Inks
| Product | Description | Curing | Benefit/ Typical properties | Technical information |
| Saral Silver 700 | Conductive silver ink | 90°C / ~1 minute | Multipurpose silver ink, with high electrical conductivity (7 mΩ/sq/25 μm), for low-cost applications. Suitable for paper and plastic substrates. Screen printable; Solvent based; Thermalyl dried/cured | |
| Saral Silver 700 | Conductive polymer ink | 90°C / ~1 minute | Transparent and conducting polymeric ink, suitable for plastic and paper. High conductivity and a slow drying ink. Screen printable; Water based; Thermlly dried | |
| Saral ECBlocking 300 | Electrochromic blocking ink | 90°C / ~1 minute | A pattern defining layer ink, which defines the image to be visible at the front electrode. Screen printable; Solvent based; Thermalyl dried | |
| Saral ECElectrolyte 200 | Solid electrolyte ink | 90°C / ~1 minute | A solid electrolyte ink that works as an ionically conducting layer between the front and back electrodes. Screen printable; Water based; Thermally dried | |
| SaralEC Display ink set | EC Display set | 90°C / ~1 minute | Saral Silver 700 Saral ConductingPolymer 700 Saral ECBlocking 300 Saral ECElectrolyte 200 |
Conductive Adhesives
| Product | Description | Curing | Benefit/ Typical properties | Technical information |
| Bectron? CG 5660 | Electronic conductive adhesive (ECA) | 45 min at 90°C or 10 min at 130°C | Single component, conductive, epoxide, adhesive for applications in electronics and printed electronics, connecting electronic components, screen printable, 0.400 O/sq/mil | PDF (EN) |
| Bectron? CG 5661 | Electronic conductive adhesive (ECA) | 45 min at 90°C or 10 min at 130°C | Single component, conductive, epoxide, adhesive for applications in electronics and printed electronics, connecting electronic components, dispensable by jetting, 0.400 O/sq/mil | |
| Saral SilverGlue Beta 700 | Silver conductive adhesive ink | 1 min - 3 min at 90°C - 120°C | Especially designed anisotropic silver-based glue to electrically interconnect two substrates, heat activated glue, suitable for paper/plastic. Screen printable; Solvent based; Thermally cured | |
| Saral SilverGlue Alpha 600 | Silver conductive adhesive ink | 5 min - 20 min at 100°C - 150°C | Silver based conducting glue for fixing SMD components or PCB on paper/plastic, Low temperature curing (110°C), two components ink, suitable for paper, plastic and glass. Screen printable; Solvent based; Thermally cured | |
| Saral SilverGlue Pressure 200 | Silver conductive adhesive ink | 1 min - 2 min at 90°C - 120°C | Especially designed anisotropic silver-based glue to electrically interconnect two substrates, pressure activated glue, suitable for paper/plastic. Screen printable; Solvent based; Thermally cured | |
| Saral SilverGlue UV 100 | UV Silver conductive adhesive ink | ~500 mJ/cm2 | Especially designed for fast curing of SMD components (with bottom contact pads only) on transparent plastic. UV curable silver based conductive adhesive. Cured glue is isotopically conductive. Screen printable; Solvent based; Thermally cured |
Non conductive adhesives
| Product | Description | Curing | Benefit/ Typical properties | Technical information |
| Elan-glue? AC 1611 | Insulating and transparent electronic adhesive | UV-cure only | Single component, acrylates, transparent, globe top in thick layer | PDF (EN) |
| Elan-glue? AC 1650 | Insulating and transparent electronic adhesive | UV-cure only | Single component, acrylates, transparent, globe top in thick layer | PDF (EN) |
| Elan-glue? EP 5350 | Insulating electronic adhesive | Thermal cure (90–130°C) | Single component, epoxide, fixing electronic components | PDF (EN) |
| Elan-glue? EP 5611 | Insulating electronic adhesive | UV + thermal cure | Single component, epoxide, globe top for electronic components | PDF (EN) |
| Elan-glue? EP 5620 | Insulating and transparent electronic adhesive | Thermal cure (80–90°C) | Single component, epoxide, transparent, globe top in thin layer | PDF (EN) |
| Saral HotMeltGlue 800 | Insulating and transparent electronic adhesive | 1 min - 2 min at 90°C - 110°C | An ink that works as a hot melt glue when heated above 100°C. After printing and drying, the printed sheets can be stacked on top of each other, as the glue is not active at room temperature. Screen printable; Solvent based; Thermally dried |
Thermoformable insulating Inks
| Product | Description | Curing | Benefit/ Typical properties | Technical information |
| Bectron? CP 6680 | Thermoformable conductive silver ink | 10 min at 120°C | Optimized for in-mold electronics, 0.025 ?/sq/mil | |
| Bectron? CP 6681 | Conductive silver ink | 10 min at 120°C | Optimized for PC films, 0.015 Ω/sq/mil | |
| Bectron? DP 8480 | Thermoformable insulating ink | 10 min at 120°C | Optimized for in-mold electronics, good adhesion to silver and PC films | |
| Bectron? GP 9580 | Thermoformable conductive carbon ink | 10 min at 120°C | Optimized for in-mold electronics, good adhesion to silver and PC films, 55 Ω/sq/mil | |
| Bectron? CT 6660 | Thinner | Thinner for Bectron? CP 6680, Bectron? CP 6681 | PDF (EN) | |
| Saral Copper 100B | Conductive copper ink | 5 min -10 min at 110°C | Low cost, air-curable copper particle based ink with a low sheet resistance (~10 mΩ /sq/25 μm). Suitable for paper and plastic substrates. Screen printable; Water-based; Thermally dried/cured | |
| Saral StretchSilver 800 | Conductive stretchable silver ink | 10 min at 120°C | Stretchable silver ink for stretchable electrical connections. Specially designed for bending applications such as TPU or bendable plastics with a good sheet resistance (30 mΩ/sq/25 μm). Screen printable; Solvent-based; Thermally dried/cured |
High temperature insulating Inks
| Product | Description | Curing | Benefit/ Typical properties | Technical information |
| Bectron? CP 6690 | High temperature conductive silver ink | 10 min at 160°C | Optimized for high temperature applications up to 200°C, good adhesion to ELAN-Film HT 180 and Kapton & glass, 0.015 Ω/sq/mil | |
| Bectron? DP 8491 | High temperature insulating ink | 10 min at 160°C | Optimized for high temperature applications up to 200°C, good adhesion to ELAN-Film HT 180 and Kapton | |
| Saral Copper 100B | Conductive copper ink | 5 min -10 min at 110°C | Low cost, air-curable copper particle based ink with a low sheet resistance (~10 mΩ /sq/25 μm). Suitable for paper and plastic substrates. Screen printable; Water-based; Thermally dried/cured |
Transparent insulating Inks
| Product | Description | Curing | Benefit/ Typical properties | Technical information |
| Bectron? DP 8481 | Insulating ink transparent | 5 m/min at >600 mJ/cm2 UVA | Good adhesion to silver, treated PET and PC films |
Translucent insulating Inks
| Product | Description | Curing | Benefit/ Typical properties | Technical information |
| Bectron? DP 8442 | Insulating ink green | 5 m/min at >600 mJ/cm2 UVA | Good adhesion to silver, untreated and treated PET films | |
| Bectron? DP 8443 | Insulating ink blue | 5 m/min at >600 mJ/cm2 UVA | Good adhesion to silver, untreated and treated PET films | |
| Bectron? DP 8444 | Insulating ink colorless | 5 m/min at >600 mJ/cm2 UVA | Good adhesion to silver, untreated and treated PET films | |
| Bectron? DP 8445 | Insulating ink colorless and flexible | 5 m/min at >600 mJ/cm2 UVA | Good adhesion to silver, untreated and treated PET films | |
| Bectron? DP 8446 | Insulating ink green and flexible | 5 m/min at >600 mJ/cm2 UVA | Good adhesion to silver, untreated and treated PET films | |
| Bectron? DP 8480 | Thermoformable insulating ink | 10 min at 120°C | Optimized for in-mold electronics, good adhesion to silver and PC films | |
| Bectron? DP 8491 | High temperature insulating ink | 10 min at 160°C | Optimized for high temperature applications up to 200°C, good adhesion to ELAN-Film HT 180 and Kapton |
Dielectric Inks
| Product | Description | Curing | Benefit/ Typical properties | Technical information |
| Bectron? EL 7030 D | Dielectric ink | 5 m/min at >600 mJ/cm2 UVA | PEDOT, paper and various films like PET or PC | |
| Saral Dielectric 600 | Dielectric ink | 1 min - 2 min at 90°C - 150°C | Barium Titanate based ink, suitable for paper and plastic substrates, does not dissolve easily by printing other solvent based inks on top of it. Suitable for electroluminescent displays. Screen printable; Solvent based; Thermally dried | |
| Saral UVDielectric 700 | UV dielectric ink | ~200 mJ/cm2 | Barium Titanate based UV curable ink, suitable for paper and plastic substrates, does not dissolve easily by printing other solvent based inks on top of it. Suitable for capacitors printing. Screen printable; UV curable; Good adhesion |
Conductive Silver Inks
| Product | Description | Curing | Benefit/ Typical properties | Technical information |
| Bectron? CP 6662 | Conductive silver ink | 10 min at 120°C | Optimized for membrane switches, very flexible, long screen open time, good adhesion to untreated and treated PET films, 0.010 ?/sq/mil | PDF (EN) |
| Bectron? CP 6663 | Conductive silver ink | 10 min at 120°C | Optimized for membrane switches, 0.015 ?/sq/mil | PDF (EN) |
| Bectron? CP 6666 | Conductive silver ink | 10 min at 120°C | Good adhesion to glass, 0.025 ?/sq/mil | PDF (EN) |
| Bectron? CP 6667 | Conductive silver ink | 10 min at 120°C | Optimized for printing finer lines, very flexible, long screen open time, good adhesion to untreated and treated PET films, 0.015 Ω/sq/mil | PDF (EN) |
| Bectron? CP 6668 | Conductive silver ink | 3 min at 120°C | Very fast curing version, 0.010 ?/sq/mil | PDF (EN) |
| Bectron? CP 6669 | Conductive silver ink | 5 min at 120°C | Fast curing version optimized for a long screen open time, 0.010 ?/sq/mil | PDF (EN) |
| Bectron? CP 6671 | UV-curable conductive silver ink | 5 m/min at >700 mJ/cm2 UVA and 2 min at 100°C | UV-curable and ultra-low VOC, superior screen open time, 0.030 Ω/sq/mil | PDF (EN) |
| Bectron? CP 6680 | Thermoformable conductive silver ink | 10 min at 120°C | Optimized for in-mold electronics, 0.025 ?/sq/mil | PDF (EN) |
| Bectron? CP 6681 | Conductive silver ink | 10 min at 120°C | Optimized for PC films, 0.015 Ω/sq/mil | PDF (EN) |
| Bectron? CP 6690 | High temperature conductive silver ink | 10 min at 160°C | Optimized for high temperature applications up to 200°C, good adhesion to ELAN-Film HT 180 and Kapton & glass, 0.015 Ω/sq/mil | PDF (EN) |
| Bectron? CT 6660 | Thinner | Thinner for Bectron? CP 6662, Bectron? CP 6668, Bectron? CP 6669, Bectron? CP 6680, Bectron? CP 6681 | PDF (EN) | |
| Saral Silver 700 | Conductive silver ink | 10 min at 120°C | Multipurpose silver ink, with high electrical conductivity (7 mΩ/sq/25 μm), for low-cost applications. Suitable for paper and plastic substrates. Screen printable; Solvent based; Thermalyl dried/cured | |
| Saral HSCSilver 600 | Conductive silver ink | 10 min at 120°C | High conducting (8 mΩ/sq/25 μm) silver ink with a very high solid content (86%), specially designed for thick layer printing (e.g. antenna). Suitable for paper and plastic substrates. Screen printable; Solvent-based; Thermally dried | |
| Saral UVSilver 800 | UV-curable conductive silver ink | ~ 500 mJ/cm2 | UV curable silver ink, for fast curing processes. Suitable for paper and plastic substrates. A good sheet resistance (60 mΩ/sq/25 μm). Screen printable; UV curable; Good adhesion | |
| Saral StretchSilver 500 | Conductive stretchable silver ink | 10 min at 120°C | Stretchable silver ink for stretchable electrical connections, with a good sheet resistance (25 mΩ/sq/25 μm). Suitable for different stretchable substrates (e.g. textile) Screen printable; Solvent-based; Thermally dried | |
| Saral StretchSilverH2O 600 | Conductive stretchable silver ink | 2 min - 4 min at 120°C | Stretchable silver ink for stretchable electrical connections. Especially designed for bending applications (e.g. creasing) of paper. A good sheet resistance (20 mΩ/sq/25 μm). Screen printable; Water-based; Thermally dried | |
| Saral SilverH2O 600 | water-based conductive silver ink | 10 min at 120°C | Water based silver ink with moderate electrical conductivity (14 mΩ/sq/25 μm) and good surface wetting. Screen printable; Water-based; Thermally dried/cured | |
| Saral StretchSilver 800 | Conductive stretchable silver ink | 10 min at 120°C | Stretchable silver ink for stretchable electrical connections. Specially designed for bending applications such as TPU or bendable plastics with a good sheet resistance (30 mΩ/sq/25 μm). Screen printable; Solvent-based; Thermally dried/cured |
Conductive Carbon Inks
| Product | Description | Curing | Benefit/ Typical properties | Technical information |
| Bectron? GP 9552 | Conductive carbon ink | 10 min at 120°C | Silver top-coat with good adhesion to treated PET films, 40 ?/sq/mil | |
| Bectron? GP 9553 | Conductive carbon ink | 10 min at 120°C | Good adhesion to silver and untreated PET films, 40 ?/sq/mil | |
| Bectron? GP 9555 | Conductive carbon ink | 10 min at 120°C | Good adhesion to glass, resistance adjustable with Bectron AP 2555, 50 ?/sq/mil | |
| Bectron? AP 2555 | Modifier | 10 min at 120°C | Additive to rejust the resistivity of Bectron? GP 9555 | |
| Bectron? GP 9580 | Thermoformable conductive carbon ink | 10 min at 120°C | Optimized for in-mold electronics, good adhesion to silver and PC films, 55 Ω/sq/mil | |
| Saral Carbon 700A | Conductive Carbon ink | 10 min at 120°C | Solvent based carbon ink with very good adhesion on plastic and paper. A good sheet resistance (30 Ω/sq/25 μm). Screen printable; Solvent based; Thermally dried | |
| Saral CarbonH2O 400 | Conductive carbon ink | 10 min at 120°C | Water based carbon ink with good surface wetting. Especially designed for paper-based electronics. A good sheet resistance (40 Ω/sq/25 μm). Screen printable; Water based; Termally dried | |
| Saral ResistorKOhm 100 | Resistive ink | 15 sec - 5 min at 90°C - 120°C | Carbon based resistive ink to print resistors in kilo ohm range (1.8 kΩ/sq/6 μm). Very low influence of temperature and humidity in resistance. Screen printable; Solvent based; Thermally dried | |
| Saral ResistorMOhm 100 | Resistive ink | 15 sec - 5 min at 90°C - 120°C | Carbon based resistive ink to print resistors in mega ohm range (~2 MΩ/sq/6 μm). Very low influence of temperature and humidity in resistance. Screen printable; Solvent based; Thermally dried |
Other conductive Inks
| Product | Description | Curing | Benefit/ Typical properties | Technical information |
| Bectron? CP 6612 | Conductive silver/carbon ink | 10 min at 120°C | Long screen open time, 0.025 ?/sq/mil | |
| Bectron? CP 6618 | Conductive silver/carbon ink | 3 min at 120°C | Very fast curing version, 0.025 ?/sq/mil | |
| Bectron? CP 6619 | Conductive silver/carbon ink | 5 min at 120°C | Fast curing version optimized for a long screen open time, 0.025 ?/sq/mil | |
| Bectron? CT 6660 | Thinner | Thinner for Bectron? CP 6618, Bectron? CP 6619 | PDF (EN) | |
| Saral ConductingPolymer 700 | Conductive polymer ink Transparent conductive ink | 30 sec - 5 min at 90°C -120°C | Transparent and conducting polymeric ink, suitable for plastic and paper. High conductivity and a slow drying ink. Screen printable; Water based; Thermlly dried | |
| Saral Copper 100B | Conductive copper ink | 5 min -10 min at 110°C | Low cost, air-curable copper particle based ink with a low sheet resistance (~10 mΩ /sq/25 μm). Suitable for paper and plastic substrates. Screen printable; Water-based; Thermally dried/cured | |
| Saral ConductingPolymer 600 | Conductive polymer ink | 10 sec - 1 min at 70°C -120°C | Fast drying transparent and conducting polymeric ink, with a moderate electrical conductivity, suitable for paper. Screen printable; Water based; Thermlly dried |
Solvent based Inks
| Product | Description | Curing | Benefit/ Typical properties | Technical information |
| Bectron? CP 6662 | Conductive silver in | 10 min at 120°C | Optimized for membrane switches, very flexible, long screen open time, good adhesion to untreated and treated PET films, 0.010 ?/sq/mil | PDF (EN) |
| Bectron? CT 6660 | Thinner | Thinner for Bectron? CP 6662 | PDF (EN) | |
| Saral BluePhosphorL 800 | phosphor blue ink | 90°C / ~1 minute | Blue color light emitting ink, long working life of the display, suitable for paper, plastic and glass. Screen printable; Solvent based; Thermally dried | |
| Saral GreenPhosphorL 800 | phosphor green ink | 90°C / ~1 minute | Green color light emitting ink, long working life of the display, suitable for paper, plastic and glass. Screen printable; Solvent based; Thermally dried | |
| Saral OrangePhosphorL 800 | phosphor orange ink | 90°C / ~1 minute | Orange color light emitting ink, long working life of the display, suitable for paper, plastic and glass. Screen printable; Solvent based; Thermally dried | |
| Saral WhitePhosphorL 800 | phosphor white ink | 90°C / ~1 minute | White color light emitting ink, long working life of the display, suitable for paper, plastic and glass. Screen printable; Solvent based; Thermally dried | |
| Saral Silver 700 | Conductive silver ink | 90°C / ~1 minute | Multipurpose silver ink, with high electrical conductivity (7 mΩ/sq/25 μm), for low-cost applications. Suitable for paper and plastic substrates. Screen printable; Solvent based; Thermally dried/cured | |
| Saral ConductingPolymer 700 | Conductive polymer ink Transparent conductive ink | 90°C / ~1 minute | Transparent and conducting polymeric ink, suitable for plastic and paper. High conductivity and a slow drying ink. Screen printable; Water based; Thermally dried | |
| Saral ConductingPolymer 600 | Conductive polymer ink | 90°C / ~1 minute | Fast drying transparent and conducting polymeric ink, with a moderate electrical conductivity, suitable for paper. Screen printable; Water based; Thermally dried | |
| SaralEL Display ink set 1 | EL ink set (solvent based) | 90°C / ~1 minute | Saral Silver 700 | |
| SaralEL Display ink set 2 | EL ink set (solvent based) | 90°C / ~1 minute | Saral Silver 700 |
UV Inks
| Product | Description | Curing | Benefit/ Typical properties | Technical information |
| Bectron? EL 7001 AB | Active phosphor blue ink | 5 m/min at >600 mJ/cm2 UVA | PEDOT, paper and various films like PET or PC | |
| Bectron? EL 7002 AC | Active phosphor cyan ink | 5 m/min at >600 mJ/cm2 UVA | PEDOT, paper and various films like PET or PC | |
| Bectron? EL 7003 AG | Active phosphor green ink | 5 m/min at >600 mJ/cm2 UVA | PEDOT, paper and various films like PET or PC | |
| Bectron? EL 7030 D | Dielectric ink | 5 m/min at >600 mJ/cm2 UVA | PEDOT, paper and various films like PET or PC | |
| Bectron? EL 7080 TC | Transparent conductive ink | 5 min at 100°C | Paper and various films like PET or PC | |
| Bectron? EL 7090 E | Encapsulation ink | 5 m/min at >200 mJ/cm2 UVA | PEDOT, paper and various films like PET or PC; transparent insulation varnish | |
| Saral UVBluePhosphorL 800 | UV phosphor blue ink | ~200 mJ/cm2 | UV curable blue color light emitting ink, long working life of the display, suitable for paper, plastic and glass. Screen printable; UV curable; No dielectric layer needed | |
| Saral UVGreenPhosphorL 800 | UV phosphor green ink | ~200 mJ/cm2 | UV curable green color light emitting ink, long working life of the display, suitable for paper, plastic and glass. Screen printable; UV curable; No dielectric layer needed | |
| Saral UVOrangePhosphorL 800 | UV phosphor orange ink | ~200 mJ/cm2 | UV curable orange color light emitting ink, long working life of the display, suitable for paper, plastic and glass. Screen printable; UV curable; No dielectric layer needed | |
| Saral UVWhitePhosphorL 800 | UV phosphor white ink | ~200 mJ/cm2 | UV curable white color light emitting ink, long working life of the display, suitable for paper, plastic and glass. Screen printable; UV curable; No dielectric layer needed | |
| Saral UVSilver 800 | UV curable conductive silver ink | ~ 500 mJ/cm2 | UV curable silver ink, for fast curing processes. Suitable for paper and plastic substrates. A good sheet resistance (60 mΩ/sq/25 μm). Screen printable; UV curable; Good adhesion | |
| Saral ConductingPolymer 600 | Conductive polymer ink | room temperature | Fast drying transparent and conducting polymeric ink, with a moderate electrical conductivity, suitable for paper. Screen printable; Water based; Thermlly dried | |
| SaralEL Display ink set 3 | EL ink set (UV) | Saral UVSilver 800 Saral ConductingPolymer 600 Saral UVBluePhosphorL 800 |
Electrochromic Inks
| Product | Description | Curing | Benefit/ Typical properties | Technical information |
| Saral Silver 700 | Conductive silver ink | 90°C / ~1 minute | Multipurpose silver ink, with high electrical conductivity (7 mΩ/sq/25 μm), for low-cost applications. Suitable for paper and plastic substrates. Screen printable; Solvent based; Thermalyl dried/cured | |
| Saral Silver 700 | Conductive polymer ink | 90°C / ~1 minute | Transparent and conducting polymeric ink, suitable for plastic and paper. High conductivity and a slow drying ink. Screen printable; Water based; Thermlly dried | |
| Saral ECBlocking 300 | Electrochromic blocking ink | 90°C / ~1 minute | A pattern defining layer ink, which defines the image to be visible at the front electrode. Screen printable; Solvent based; Thermalyl dried | |
| Saral ECElectrolyte 200 | Solid electrolyte ink | 90°C / ~1 minute | A solid electrolyte ink that works as an ionically conducting layer between the front and back electrodes. Screen printable; Water based; Thermally dried | |
| SaralEC Display ink set | EC Display set | 90°C / ~1 minute | Saral Silver 700 Saral ConductingPolymer 700 Saral ECBlocking 300 Saral ECElectrolyte 200 |
Antenna Ink System
| Product | Description | Curing | Benefit/ Typical properties | Technical information |
| Bectron? CP 6662 | Conductive silver ink | 10 min at 120°C | Optimized for membrane switches, very flexible, long screen open time, good adhesion to untreated and treated PET films, 0.010 ?/sq/mil | PDF (EN) |
| Bectron? CP 6668 | Conductive silver ink | 3 min at 120°C | Very fast curing version, 0.010 Ω/sq/mil | PDF (EN) |
| Bectron? CP 6669 | Conductive silver ink | 5 min at 120°C | Fast curing version optimized for a long screen open time, 0.010 Ω/sq/mil | PDF (EN) |
| Bectron? CP 6671 | UV-curable conductive silver ink | 5 m/min at >700 mJ/cm2 UVA and 2 min at 100°C | UV-curable and ultra-low VOC, superior screen open time, 0.030 Ω/sq/mil | PDF (EN) |
| Bectron? CP 6681 | Conductive silver ink | 10 min at 120°C | Optimized for PC films, 0.015 Ω/sq/mil | PDF (EN) |
| Bectron? DP 8442 | Insulating ink green | 5 m/min at >600 mJ/cm2 UVA | Good adhesion to silver, untreated and treated PET films | PDF (EN) |
| Bectron? DP 8443 | Insulating ink blue | 5 m/min at >600 mJ/cm2 UVA | Good adhesion to silver, untreated and treated PET films | PDF (EN) |
| Bectron? DP 8444 | Insulating ink colorless | 5 m/min at >600 mJ/cm2 UVA | Good adhesion to silver, untreated and treated PET films | PDF (EN) |
| Bectron? DP 8445 | Insulating ink colorless and flexible | 5 m/min at >600 mJ/cm2 UVA | Good adhesion to silver, untreated and treated PET films | PDF (EN) |
| Bectron? CT 6660 | Thinner | Thinner for Bectron? CP 6662, Bectron? CP 6668, Bectron? CP 6669, Bectron? CP 6681 | PDF (EN) | |
| Saral HSCSilver 600 | Conductive silver ink | 15 sec - 60 min at 90°C - 150 °C | High conducting (8 mΩ/sq/25 μm) silver ink with a very high solid content (86%), specially designed for thick layer printing (e.g. antenna). | PDF (EN) |
Battery Inks
| Product | Description | Curing | Benefit/ Typical properties | Technical information |
| Saral Silver 600A | Conductive silver ink | 15 sec - 60 min at 90°C -150°C | Conductive silver ink (<20 mΩ/sq/25 μm), especially designed for printed battery. | |
| Saral Carbon 700A | Conductive Carbon ink | 15 sec - 5 min at 90°C -120°C | Solvent based carbon ink with good adhesion (30 Ω/sq/25 μm). | |
| Saral Zinc 700 | Zinc based anode ink | 1 min - 2 min at 90°C - 110°C | Zinc particle-based ink, which works as an anode in the printed battery. | |
| Saral MnO2 800 | MnO2 based cathode ink | 1 min - 2 min at 90°C - 110°C | Manganese dioxide particle-based ink, which works as a cathode in the printed battery. | |
| Saral BatElectrolyte 700 | Zinc chloride based electrolyte ink | no drying needed. | The ink comprises zinc chloride electrolyte in viscous water. | |
| Saral BatBarrier 600 | Cellulose based separator layer ink | 1 min - 2 min at 90°C - 110°C | An ionically conductive separation layer ink to keep the anode and the cathode separated. | |
| Saral HotMeltGlue 800 | Insulating and transparent hot melt adhesive ink | 1 min - 2 min at 90°C - 110°C | An ink that works as a hot melt glue when heated above 100°C. After printing and drying, the printed sheets can be stacked on top of each other, as the glue is not active at room temperature. | |
| Saral Printed Battery ink set | Printed battery ink set | Saral Silver 600A Saral Carbon 700A Saral Zinc 700 Saral MnO2 800 Saral BatElectrolyte 700 Saral BatBarrier 600 Saral HotMeltGlue 800 |
Electrochromic Display
| Product | Description | Curing | Benefit/ Typical properties | Technical information |
| Saral Silver 700 | Conductive silver ink | 90°C / ~1 minute | Multipurpose silver ink, with high electrical conductivity (7 mΩ/sq/25 μm). | |
| Saral ConductingPolymer 700 | Transparent and conductive polymer ink | 90°C / ~1 minute | Transparent and conducting polymeric ink | |
| Saral ECBlocking 300 | Insulating ink | 90°C / ~1 minute | A pattern defining layer ink, which defines the image to be visible at the | |
| Saral ECElectrolyte 200 | Solid electrolyte ink | 90°C / ~1 minute | A solid electrolyte ink that works as an ionically conducting layer between the front and back electrodes. | |
| SaralEC Display ink set | EC Display set | 90°C / ~1 minute | Saral Silver 700 Saral ConductingPolymer 700 Saral ECBlocking 300 Saral ECElectrolyte 200 |
Heating Element Inks
| Product | Description | Curing | Benefit/ Typical properties | Technical information |
| Bectron? CP 6680 | Thermoformable conductive silver ink | 10 min at 120°C | Optimized for in-mold electronics, 0.025 ?/sq/mil | PDF (EN) |
| Bectron? CT 6660 | Thinner | Thinner for Bectron? CP 6680 | PDF (EN) | |
| Bectron? CP 6690 | High temperature conductive silver ink | 10 min at 160°C | Optimized for high temperature applications up to 200°C, good adhesion to ELAN-Film HT 180 and Kapton & glass, 0.015 Ω/sq/mil | PDF (EN) |
| Saral Heating 100 | Carbon based heating element ink | 15 sec - 5 min at 90°C -120°C | Suitable for a maximum heating temperature of 100°C.
|
Fine Line
| Product | Description | Curing | Benefit/ Typical properties | Technical information |
| Bectron? CP 6667 | Conductive silver ink | 10 min at 120°C | Optimized for printing finer lines, very flexible, long screen open time, good adhesion to untreated and treated PET films, 0.015 Ω/sq/mil | PDF (EN) |
| Bectron? CP 6500 | Conductive silver ink | 10 min at 120°C | Optimized for printing fine lines, very flexible, long screen open time, good adhesion to untreated and treated PET films, 0.015 Ω/sq/mil | PDF (EN) |
High Temperature Inks
| Product | Description | Curing | Benefit/ Typical properties | Technical information |
| Bectron? CP 6690 | High temperature conductive silver ink | 10 min at 160°C | Optimized for high temperature applications up to 200°C, good adhesion to ELAN-Film HT 180 and Kapton & glass, 0.015 Ω/sq/mil | PDF (EN) |
| Bectron? DP 8491 | High temperature insulating ink | 10 min at 160°C | Optimized for high temperature applications up to 200°C, good adhesion to ELAN-Film HT 180 and Kapton | PDF (EN) |
| Saral Copper 100B | Conductive copper ink | 5 min at 120°C | Low cost, air-curable copper particle based ink with a low sheet resistance (~10 mΩ /sq/25 μm). |
IME Inks
| Product | Description | Curing | Benefit/ Typical properties | Technical information |
| Bectron? CP 6680 | Thermoformable conductive silver ink | 10 min at 120°C | Optimized for in-mold electronics, 0.025 ?/sq/mil | PDF (EN) |
| Bectron? CP 6681 | Conductive silver ink | 10 min at 120°C | Optimized for PC films, 0.015 Ω/sq/mil | PDF (EN) |
| Bectron? DP 8480 | Thermoformable insulating ink | 10 min at 120°C | Optimized for in-mold electronics, good adhesion to silver and PC films | PDF (EN) |
| Bectron? GP 9580 | Thermoformable conductive carbon ink | 10 min at 120°C | Optimized for in-mold electronics, good adhesion to silver and PC films, 55 Ω/sq/mil | PDF (EN) |
| Bectron? CT 6660 | Thinner | Thinner for Bectron? CP 6680, Bectron? CP 6681 | PDF (EN) | |
| Saral Copper 100B | Conductive copper ink | 5 min at 120°C | Low cost, air-curable copper particle based ink with a low sheet resistance (~10 mΩ /sq/25 μm). | |
| Saral StretchSilver 800 | Conductive stretchable silver ink | 10 min at 120°C | Stretchable silver ink for stretchable electrical connections. Specially designed for bending applications such as TPU or bendable plastics with a good sheet resistance (30 mΩ/sq/25 μm). |
Membrane Switch Inks
| Product | Description | Curing | Benefit/ Typical properties | Technical information |
| Bectron? CP 6612 | Conductive silver/carbon ink | 10 min at 120°C | Long screen open time, 0.030 Ω/sq/mil | PDF (EN) |
| Bectron? CP 6618 | Conductive silver/carbon ink | 3 min at 120°C | Very fast curing version, 0.025 Ω/sq/mil | PDF (EN) |
| Bectron? CP 6619 | Conductive silver/carbon ink | 5 min at 120°C | Fast curing version optimized for a long screen open time, 0.025 Ω/sq/mil | PDF (EN) |
| Bectron? CP 6662 | Conductive silver ink | 10 min at 120°C | Optimized for membrane switches, very flexible, long screen open time, good adhesion to untreated and treated PET films, 0.010 ?/sq/mil | PDF (EN) |
| Bectron? DP 8442 | Insulating ink green | 5 m/min at >600 mJ/cm2 UVA | Good adhesion to silver, untreated and treated PET films | PDF (EN) |
| Bectron? DP 8443 | Insulating ink blue | 5 m/min at >600 mJ/cm2 UVA | Good adhesion to silver, untreated and treated PET films | PDF (EN) |
| Bectron? DP 8444 | Insulating ink colorless | 5 m/min at >600 mJ/cm2 UVA | Good adhesion to silver, untreated and treated PET films | PDF (EN) |
| Bectron? GP 9552 | Conductive carbon ink | 10 min at 120°C | Silver top-coat with good adhesion to treated PET films, 40 ?/sq/mil | PDF (EN) |
| Bectron? GP 9553 | Conductive carbon ink | 10 min at 120°C | Good adhesion to silver and untreated PET films, 40 ?/sq/mil | PDF (EN) |
| Bectron? CT 6660 | Thinner | Thinner for Bectron? CP 6612, Bectron? CP 6618, Bectron? CP 6619, Bectron? CP 6662 | PDF (EN) |
Sensor Inks
| Product | Description | Curing | Benefit/ Typical properties | Technical information |
| Bectron? CP 6669 | Conductive silver ink | 5 min at 120°C | Fast curing version optimized for a long screen open time, 0.010 Ω/sq/mil | PDF (EN) |
| Bectron? GP 9552 | Conductive carbon ink | 10 min at 120°C | Silver top-coat with good adhesion to treated PET films, 40 ?/sq/mil Screen printable; Solvent based; Thermally dried | PDF (EN) |
| Saral HumiditySensor 400 | Carbon based ink | 5 min - 15 min at 100°C - 120°C | Fast drying humidity sensitive ink, resistance increases with humidity. | |
| Saral TemperatureSensor 100 | Carbon based ink | 5 min - 15 min at 100°C - 120°C | Fast drying temperature sensitive ink. Resistance increases with temperature. | |
| Saral PressureSensor 200 | Carbon based ink | 10 min - 60 min at 120°C | Piezoresistive pressure sensor ink, resistance decreases by increasing pressure |